2
1. Stop machine on a level surface, not on a slope.
2. Disengage mower blades or any other attachments.
3. Lower attachments to the ground.
4. Lock the park brake.
5. Stop the engine.
6. Remove the key.
7. Wait for engine and all moving parts to stop before you leave the operator’s seat.
8. Close fuel shut-off valve, if your machine is equipped.
9. Disconnect the negative battery cable or remove the spark plug wire (for gasoline engines) before servicing
the machine
INSTALL REMOTE CONTROL / RECEIVER BOX
1. Plug the wires labeled "12v Out" into the pump or
motor side of your sprayer.
2.
Expose adhesive backing located on the back of the
remote receiver box and adhere the receiver box (A)
close to the electric motor but out of the way of hoses,
cap or moving parts.
NOTE: Be sure surface is clean and dry prior to
adhering to sprayer. It is recommended to wipe
area thoroughly with alcohol or a non-residue
cleaning agent.
15 / 25 gal
45 / 60 gal
A
A
