7
Parts in Kit
A
B
C
D
Main Components
Description
Qty.
A
TKV 20 Main Assembly
1
B
5' of 8" dia. Steel Coil Hose
1
C
Hose Clamps
2
D
PTO Shaft
1
E
SMV Sign
1
F
Plastic End Cap
4
Other Requirements
Front Ballast
A full TKV 20 can weigh upwards of 600 pounds. Refer
to the manufacturer or dealership for proper ballasting
requirements.
Boot Kit (See Dealer)
A boot for your mower deck is required to attach the
TKV 20’s 8" dia. hose. Please consult your dealer to
acquire this part for your tractor.
Front Weight Bracket Kit
Part # TK95054 - Fits Kubota BX2360, BX2660, BX2370,
BX2670, BX2380, BX2680
Properly ballasting your tractor is important to ensure safe
operation with the TKV 20, especially when full.
A minimum of 200 lbs. (91 kg) is required.
Stay Chain Kit
Part # TK95052 - Fits Kubota BX2380, BX2680
Part # TK95053 - Fits Kubota BX2350, BX2360, BX2660,
BX2370, BX2670
This kit stabilizes a TKV 20 when in operation on inclines
and keeps the PTO shaft aligned when the tractor’s mower
deck is lowered
Wiring Harness Kit
Part # TK95051 - Fits Kubota BX2360, BX2660, BX2370,
BX2670, BX2380, BX2680
A dedicated wiring harness connects the TKV 20 to your
tractor. Included is a rocker switch with a ROPS-mounted
bracket to operate the electric actuator.
Tractor Requirements
Tractor horsepower should be within the range noted below.
Tractors outside the horsepower range must not be used.
Horsepower Rating ............................................20-60 HP
Rear PTO Shaft ......................................... 1-3/8" 6-Spline
Rear PTO Speed .................................................540 RPM
Hitch Type ...............Category 1 3-Point, Quick-Hitch Ready
3-Point Lift Capacity (24 in. behind link arms) ....... 650 lb.
E
F
