3.4 BASIC FUNCTIONS
To turn the volume up for current audio source:
●
Tap
.
With each tap, a louder tone is played on the speaker until you reach the maximum volume, as indicated by
the maximum volume tone.
To turn the volume down for current audio source:
●
Tap
.
With each tap, a quieter tone is played on the speaker until you reach the minimum volume, as indicated by
the minimum volume tone.
To mute the microphone completely and lower the speaker volume to the minimal level when an audio
source is active:
●
Tap
and
.
A descending tone is played on the speaker.
3.5 PAIRING YOUR UNIT TO BLUETOOTH DEVICES
Your TERRANO XT has two Bluetooth channels for connection to Bluetooth devices such as mobile phones,
GPS devices and Bluetooth music players with A2DP.
To connect your TERRANO XT to a Bluetooth device, you must first pair them while in Standby (see
TERRANO
XT Modes and Events - LED Indications
on page 23). Once paired, they automatically recognize each other
whenever they are within range.
To pair Bluetooth channel 1 to a mobile phone:
1.
Enable Bluetooth on the mobile phone.
2.
Press
for 5 seconds.
The LED flashes red and blue.
3.
On your mobile phone, search for Bluetooth devices as described in your phone's instructions.
4.
When your TERRANO XT appears in the list of available devices, select it.
If prompted for a PIN or Passkey, enter 0000 (four zeros).
The phone confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To pair Bluetooth channel 2 to another Bluetooth device:
1.
Enable Bluetooth on the device (such as mobile phone, GPS device, music player).
2.
Press
for 5 seconds.
7
Summary of Contents for XT
Page 1: ......
