AC3 and DTS.
It is also possible to use the interfaces independently of the S/PDIF standard. The included
Cyberlink PowerDVD application supports the transfer of AC-3 or DTS streams via the digital
output. The following points must be observed in this regard:
“Digital” tab: “S/PDIF active” must be enabled and “Wave Playback” must be selected as
the source for the digital output. The “Non-Audio” flag may be required depending on the
audio component used to process the AC-3 or DTS signal.
·
·
36
SoundSystem Aureon 5.1 Sky (English)
In Windows98SE, Sensaura must also be disabled. If Sensaura is active, it must be dis-
abled in the “Speaker” window. You must restart your system after changing the Sensaura
support setting. A message will be displayed to this effect under the button.