"QQFOEJY
.*%*JNQMFNFOUBUJPOBOE$IBSUT
*OTUBMMBUJPO*OUSPEVDUJPO.*%*
EJHJUBM9UFOTJPONJDSP8"7&1$
2.82 INFR
********************************************************************
INFR 07h Information Request
This only works for Microwave PC on Terratec EWS Frontmodule !
The full format of a INFR Dump is:
Index Label Value Description
-----------------------------------------------------------
0 EXC F0h Marks Start of SysEx
1 IDW 3Eh Waldorf Electronics GmbH ID
2 IDE 0Eh Microwave 2 ID
3 DEV Device ID
4 IDM 08h here INFR
5 Typ xx Typ of information
6 EOX F7h End of SysEx
-----------------------------------------------------------
********************************************************************
2.83 INFD
********************************************************************
INFD 18h Information Dump
The full format of a INFD Dump is:
Index Label Value Description
-----------------------------------------------------------
0 EXC F0h Marks Start of SysEx
1 IDW 3Eh Waldorf Electronics GmbH ID
2 IDE 0Eh Microwave 2 ID
3 DEV Device ID
4 IDM 18h here INFD
5 Typ xx Typ of Information give
6... ii... Information specific
6+N EOX F7h End of SysEx
-----------------------------------------------------------
********************************************************************
Information types
xx Information N ii
-----------------------------------------------------------
00: Sampling rate 1 0: 32000 1:40000 2:44100 3:48000
01: Routing 3 out1,out2,out3 :triple output assignments bitvectors
02:
MIDI Switches1 bit 0: Serial MIDI in on/off 1: IIC MIDI in 2: IIC MIDI out
03:
Ext In Select1 0: Digital input 1 1:Digital input2 (Dream 9407)
Output assignments:
out1 (ESSI0 TX0) Bit 3 Bit 2 Bit 1 Bit 0
(digital out 1) In1 In2 / 9407 MW Main MW Sub
(ESSI0 Rx) (ESSI1 RX)
out2 (ESSI1 TX0) Bit 3 Bit 2 Bit 1 Bit 0
(digital out 2) In1 In2 MW Main MW Sub
(ESSI0 Rx) (ESSI1 RX)
out3 (ESSI1 TX1) Bit 3 Bit 2 Bit 1 Bit 0
(Dream Input) In1 In2 MW Main MW Sub
(ESSI0 Rx) (ESSI1 RX)
So a complete routing dump is
F0,3E,0E,DEV,18,1,out1,out2,out3,F7
Default routing:
out1 = 0Fh
out2 = 0Fh
out3 = 0Fh
That is all signals to all outputs.
MIDI Switches:
0: off , else on
So a complete MIDi Switch dump is
F0,3E,0E,DEV,18,2,MM,F7
Default switching:
MM = 7, That is all in-/outputs on
MIDI IIC in is currently ignored to ensure all others can be turned on again.
