background image

2

TTSolo1-NL

CE declaration

We:

TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany

hereby declare that the product:

TTSolo1-NL 

to which this declaration refers is in compliance with the following standards or standardizing documents:

1. EN 55022

2. EN 50082-1

The following are the stipulated operating conditions and environmental conditions for said compliance:

Residential, business and commercial environments and small-company environments.

This declaration is based on:

Test report(s) of the EMC testing laboratory

TerraTec

®

 ProMedia, SoundSystem Gold, SoundSystem Maestro, SoundSystem Base1, AudioSystem EWS

®

64, AudioSystem

EWS88 MT, XLerate, XLerate Pro, Base2PCI, TerraTec 128iPCI, , TerraTV Radio+, TerraTValue, WaveSystem, MIDI Smart

and MIDI Master Pro are trademarks registered by TerraTec

®

 Electronic GmbH Nettetal.

In most cases, the designations used in this handbook for software and hardware are also registered trademarks and are thus

subject to the relevant regulations.

©TerraTec

®

 Electronic GmbH, 1994-1999. All rights reserved ().15.10.99

Meticulous care has been exercised in the preparation of all text passages and illustrations in this User Guide. TerraTec Electro-

nic GmbH and its authors, however, accept no liability, legal or otherwise, for errors or the consequences of such errors. We

reserve the right to technical modifications.

All text passages in this documentation are copyrighted. All rights reserved. No part of this documentation may be reproduced

in any form whatsoever, by photography, microfilming or other process or rendered into a language/form usable by computers

without the prior, written consent of the authors. All rights for use and propagation by presentation, radio and television are

also reserved.

Summary of Contents for TT Solo 1-NL









Reviews: