Quick Setup Guide
TERRATEC VR-1
Manual
1. Remove the Smartphone fixture from the VR-1 and reinsert the Smart-
phone - as displayed in the graph - with the display showing towards you.
2. Please start the corresponding APP, before you reinsert the Smartphone
fixture.
3. For some APPs some more settings will be required – please proceed with
the instructions of the APP before you place the Smartphone fixture into
the VR-1 again.
4. With some APPs, you will be requested to scan a QR
code, in order to guarantee the correct representati-
on on the VR-1. Please use the following QR code to do so:
You will also find it on the label at the side part of the VR-1.
5. 5In order to set the distance of the lens, shift the two controllers for the
lens setting to the front or rear.
6. In order to set the focus, shift the two controllers for the focus setting to
the right or left.
7. Headphones or the charging cable may be connected via the recess at the
side of the VR-1.
8. At the front side there is a flap in order to use the camera which is integ-
rated in the Smartphone.
9. In the App or Play Store you will find the APPs which are compatible with
the VR under the search key “VR”.
10. Videos need to be available in the Split-Screen format in order that they
are compatible with the VR-1.
Warning notes:
– Keep the VR-1 away from heat sources, direct sun radiation, humidity and
liquids.
– Keep the VR-1 free from dirt.
– It is not a toy.
– If you feel nausea, malaise, disorientation or eye fatigue when using the
device, immediately stop using it.
– After the use, do not directly drive your car or operate heavy machines,
especially if you feel disoriented or impaired after the use.
– Do not use the VR-1 on the road or traffic, whilst on a walk, etc.
– Not suitable during pregnancy, in case of hypertension and fear of heights.
– If you feel ill or dizziness when using the device, please stop using it for
a moment.
1. Strap Hook
2. Focal Point Adjustment
3. Lens Distance Adjustment
4. Secure Device Catridge
5. Lenses
6. Memory Foam Padding
1
1
2
3
4
5
6
