1
Contents
Safety Instructions
Features
Instructions
Assembly and use
Cleaning and Maintenance
Safety Precautions for your steam cleaner
READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER
SAFETY PRECAUTIONS FOR YOUR STEAM MOP.
WARNING-DANGER OF SCALDING
•To provide continued protection against risk of electric shock, connect to properly grounded
outlets only.
•Do not use outdoors.
• Your steam mop is intended for domestic household use only.
• Only use the attachments supplied with your steam mop. Others may cause hazards.
• Always unplug the mop from the power outlet when filling with water.
• Do not add detergents, chemicals, aromatic products, or solutions of any kind when filling
the mop with water as this may damage the mop or make it unsafe for use.
• The mop is switched on and heating once connected and turned on at the power outlet,
even if the steam on/off switch is in the off position.
• Always use a suitable tray when heating or cooling or at any time the mop is stationary for
more than 10 seconds, to avoid damage to surfaces. Should calcification occur, the white
‘halo’ effect can be removed using a decalcifying product or with a few drops of vinegar
applied directly to the area.
• Do not direct the steam jet toward people or pets as this could be harmful.
• Do not direct steam toward equipment containing electrical components, such as the inside
of ovens. It could damage the equipment and may cause serious injury.
• The safety pressure valve will automatically activate if the steam pressure becomes too
high in the steam chamber. This can be prevented by regular cleaning.
• Do not touch the lower part of the mop or the attachments when the mop has been in use
as these parts will be hot. Allow to cool before handling.
• Care must be taken when cleaning polished wooden floors. Do not use the mop on any
unsealed wooden flooring, including high traffic areas where the protective coating may be
worn down, as the steam may penetrate and damage the wood. Steam may also affect
flooring that has been treated with wax as it may be removed by the heat of the steam,
leaving the surface dull. If unsure, spot test a small inconspicuous area before proceeding.
• Always check the manufacturer's care and cleaning instructions before using the mop to
clean fabrics, soft furnishings and other surfaces, where possible.
• Do not use the utility head on any surface without a cloth fitted as it may damage or scratch
the surface.
• Always ensure the mop is unplugged and completely cool before cleaning the steam
chamber.
• Allow the mop to cool completely before storing
