Never use your power tool whilst under the influence of alcohol, drugs or medication.
Tiredness can often cause accidents, stay alert.
Never use your power tool without the correct guards in place.
Always use approved eye protection and dust mask. Non slip safety shoes and hearing protectors should be
worn at all times when using your power tool.
Ensure any dust collecting device supplied with your machine is connected correctly before use.
Ensure all loose clothing, long hair or jewelry is kept clear of the machine.
Before plugging your power tool into the power outlet ensure the power tool is in the OFF position.
Check that wrenches or adjusting keys have been removed. Any wrench or key left attached to a moving
part can result in injury.
Power tool use and care
.
Keep your power tool clean and well serviced at all times.
Never adjust or service any power tool before disconnecting from the mains electricity supply.
Always use the correct tool for the job.
Never force the tool to work harder than it is designed to do.
Never use your power tool with broken parts such as switches, guide fences or leg stands.
ALWAYS keep your power tools away from children.
Keep cutting tools sharp to ensure less stress on the motor.
Only have your power tool serviced by a qualified repair agent using manufacturers recommended parts.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the
safety of the power tool is maintained.
Develop a periodic maintenance schedule for your tool. When cleaning a tool be careful not to
disassemble any portion of the tool since internal wires may be misplaced or pinched or safety
guard return springs may be improperly mounted.
Certain cleaning agents such as
gasoline, carbon
tetrachloride, ammonia, etc.
may damage plastic parts.
When servicing a tool, use only identical replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of unauthorized parts or failure to follow
Maintenance Instructions may create a risk of electric shock or injury.
WARNING:
For your own safety read Instruction Manual before operating your power tool.
A) Wear eye protection
.
B) Keep hands out of the path of cutting tools.
C) Do not operate tool without guards in place.
D) Do not perform any operation freehand.
E) Never reach around cutting tools.
F) Turn off tool and wait for cutting tools to stop before moving work piece or changing settings.
G) Disconnect power(or unplug tool) before changing cutting tools or servicing.
GENERAL SAFETY INSTRUCTIONS
Read this owner's manual completely and make sure you understand all of its safety guidelines
.
1.
KEEP GUARDS IN PLACE
and in working order.
2.
REMOVE ADJUSTING KEYS & WRENCHES.
Before turning on the power tool, make sure the keys and
adjusting wrenches have been removed.
3.
KEEP WORK AREA CLEAN.
Cluttered areas and benches invite accidents.
4.
ALWAYS REMAIN ALERT WHEN THE TOOL IS IN USE.
Inattention on the part of the operator may
lead to serious injury.
5.
DON’T USE IN A DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations or
expose them to rain. Keep work area well lit.
6.
KEEP CHILDREN AWAY.
All visitors should remain at a safe distance from work area.
7.
MAKE WORKSHOP CHILD-PROOF
with padlocks, master switches or by removing starter keys.
8.
USE THE RIGHT TOOL.
Don’t force a tool or attachment to do a job for which it was not designed.
9.
USE THE PROPER EXTENSION CORD.
Make sure your extension cord is in good condition. When using
an extension cord, be sure to use one heavy enough to carry the current your product will draw. An
