8
Only use qualified repair agents to service this machine.
Only use qualified electrician to repair any damaged wiring.
NEVER remove the grounding prong from the power toll or extension cord.
Grounding Tools
Electrical Powered Connections
Grounding Instructions
Any electric powered tool that is marked “Ground Required”, must be grounded. In the
event of a malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. Any product that is equipped with
an electric cord having an equipment-grounding conductor and a grounding plug, the
plug must be plugged into a matching outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not modify the plug provided. If it will not fit the outlet, have the proper outlet
installed by a qualified electrician.
Check with a qualified electrician or service personnel if the grounding instructions
are not completely understood, or if in doubt as to whether the product is properly
grounded.
Repair or replace a damaged or worn cord immediately.
This product is for use on a nominal 120 V circuit and has a grounding plug similar to
the plug illustrated in Table1. Only connect the product to an outlet having the same
configuration as the plug. Do not use an adapter with this product.
3-Prong Plug and Outlet
Any electric powered tool that is marked Ground Required must have fitted a three
wired power cord. The main importance of this is the green wire within the cord,
this green wire must at all times be connected to the grounding prong of the plug.
This prong must never be removed or discarded. The green wire Must NEVER be
connected to any other prong. The Three prong plug must only be connected to the
power supply through a three prong power outlet.
The Illustration above shows a three prong plug and outlet.
