ĚĚŝƟŽŶĂůƐĂĨĞƚLJ/ŶƐƚƌƵĐƟŽŶƐ
This power tool is supplied with all the relevant safety guards and features, it should be checked before every
operation, this manual should be read and kept in a safe place. Whilst we warn of all the possible risks attached
to using power tools any operator must have read and understood the manual and apply their own caution and
common sense when using this power tool.
Following this guide will greatly reduce your risk of electric shock or injury.
Only use qualified repair agents to service this power tool.
Only use qualified electrician to repair any damaged wiring.
NEVER remove the grounding prong from the power tool or extension cord.
Use appropriate detectors to determine if utility lines are hidden in the work area or call the local
utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a
gas line can lead to explosion. Cutting into a water line causes property damage or may cause an electric shock.
Switch off the power tool immediately if the tool inserts jams.
Hold power tool by the insulated gripping surfaces, when performing an operation where the
Cutting tool may run into hidden wiring. Contact with a “live” wire will make exposed metal parts of the
tool “live” and shock the operator.
When working with the machine, always hold it firmly with both hands and provide for a secure
stance. The power tool is guided more secure with both hands.
Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn
or explode.
Always wait until the machine has come to a complete stop before placing it down.
Before any work on the machine (e. g., maintenance, tool change, etc.) as well as during transport
and storage, set the rotational direction switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
Avoid unintentional switching on. Carrying the power tool with your finger on the On/Off invites accidents.
Do not open the battery. Danger of short circuiting.
Protect the power tool against heat, e. g., also against continuous sun irradiation and fire.
There is danger of explosion.
In case of damage and improper use of the battery, vapors may be emitted. Provide for fresh air and
seek medical help in case of complaints. The vapors can irritate the respiratory system.
When the battery is defective, liquid can escape and come into contact with adjacent components.
Check any parts concerned. Clean such parts or replace them, if required.
Power Extension Cords
When using any extension cord the machine will suffer a power reduction due to the drop in voltage caused by
the length of the cord. This can be partially offset by selecting extension cords with lower gauge wire.
Check all extension cords for damage before use.
Avoid sharp objects.
Do not position the cord where it could be subject to traffic passing over it.
