9
26. NEVER LEAVE TOOL RUNNING UNATTENDED. Turn power off. Don’t leave tool until it
comes to a complete stop.
27. Double Insulation eliminates the need for the three wire grounded power cord and
grounded power supply system.
This power tool is supplied with all the relevant safety guards and features, it should be
checked before every operation, this manual should be read and kept in a safe place. Whilst
we warn of all the possible risks attached to using power tools any operator must have read
and understood the manual and apply their own caution and common sense when using this
power tool.
Following this guide will greatly reduce your risk of electric shock or injury.
Only use qualified repair agents to service this power tool.
Only use qualified electrician to repair any damaged wiring.
NEVER remove the grounding prong from the power tool or extension cord.
ĚĚŝƟŽŶĂůƐĂĨĞƚLJ/ŶƐƚƌƵĐƟŽŶƐ
Wear hearing protection. Exposure to noise can cause hearing loss.
Always wear eye protection.
Use appropriate detectors to determine if utility lines are hidden in the work area
or call the local utility company for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explosion. Cutting into a water line causes
property damage or may cause an electric shock.
Hold power tool by the insulated gripping surfaces, when performing an operation
where the cutting tool may run into hidden wiring. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock the operator.
When working with the machine, always hold it firmly with both hands and provide
for a secure stance. The power tool is guided more secure with both hands.
Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light
alloys can burn or explode.