9
TS074e User Manual
Warning
•
Risk of shock is present inside the device.
The cover should be removed by qualified engineers or service
personnel only.
Do not use the refrigerator outdoors.
Exposure to rain water may lead to current leakage or electric shock.
•
Be sure to install the refrigerator on a sturdy floor.
If the floor is not strong enough or the installation site is
not adequate, injury may result from the refrigerator falling or tipping over.
Never install the refrigerator in a flammable or volatile location.
This may cause explosion or fire.
Never install the refrigerator where acid or corrosive gases are present
as current leakage or electrical
shock may result due to corrosion.
•
Make sure a dedicated power source is used
as indicated on the rating label attached to the refrigerator.
•
Make sure to remove dust from the power supply plug
before inserting in a power source. A dusty plug or
improper insertion may pose a hazard.
•
Use a power supply outlet with ground (earth)
to prevent electric shock. If the power supply outlet is not
grounded, it will be necessary to have qualified engineers install a ground.
•
When removing the plug from the power supply outlet, grip the power supply plug, not the cord.
Pulling
the cord may result in electric shock or fire by short circuit.
Never damage or break the power supply plug or cord. Do not use the supply plug if its cord is loose.
This may cause fire or electric shock.
Do not touch any electrical parts such as power supply plug or any switches with a wet hand.
This may
cause electric shock.
Never ground the refrigerator through a gas pipe, water main, telephone line or lightening rod.
Such
grounding may cause electric shock in the case of an incomplete circuit.
Do not insert metal objects such as a pin or wire into any outlet, vent or gap
for inner air circulation. This
may cause electric shock.
•
If this refrigerator is to be used for storing poisons, radioactive material or other harmful products,
ensure that it is in a safe area.
Failure to do so may lead to an adverse effect on the health of personnel in the
area and local environment.
Never splash water directly onto the refrigerator
as this may cause electric shock or short circuit.
Never disassemble, repair, or modify this refrigerator yourself.
Any such work carried out by an
unauthorized person may result in fire or injury due to a malfunction.
•
Disconnect the power supply plug if there is something wrong with the refrigerator.
Continued abnormal
operation may cause electric shock or fire.
•
If the refrigerator is to be stored unused in an unsupervised area for an extended period of time, ensure
that
children do not have access and that doors cannot be closed completely.
•
Make sure to prepare a safety check sheet
when you request any repair or maintenance for the safety of
service personnel.
•
Select a level and sturdy floor for installation
. This precaution will prevent the refrigerator from tipping.
Improper installation may result in injury from the refrigerator tipping over.
This mark is labeled on the cover in which the electrical components of high voltage are enclosed to
prevent electrical shock. The cover should be removed by qualified engineers or service personnel only.
This mark indicates the location of the protective earth conductor. Do not disconnect. Disconnection of the
protective earth conductor may impair the protection provided by the device.
Summary of Contents for TS074e
