©2012 Terumo BCT, Inc.
Page 10 of 14
PN 306620452
Maintenance Procedures
To prolong equipment life and for maximum performance of the TSCD II device, recommended
maintenance procedures should be performed. Before performing any maintenance, turn off the TSCD II
device and disconnect the device from its power source.
The following cleaning solutions are approved for the TSCD II device:
Mild
detergent
Water
Isopropyl
alcohol
Broad-spectrum
disinfectant
Abrasive cleaning solutions should not be used on any surfaces of the device.
Cleaning Surfaces
Step
Action
Surface cleaning is recommended on an as-needed basis. Surfaces of the device
may be cleaned with a cloth dampened with a neutral detergent or isopropyl alcohol
for cleaning or with a broad-spectrum disinfectant. Abrasive cleaning solutions
should not be used on any surfaces of the device.
1
Turn off the device and unplug the power cord.
2
Dampen a cloth with the cleaning solution
3
Wipe the surfaces with the dampened cloth.
Note:
When cleaning the TSCD II device, be careful not to spill any
cleaning solutions inside the device. If any blood, blood product or
cleaning solution is spilled into the device, discontinue use and contact
your Terumo BCT representative.
