P
ro
b
le
m
S
o
lv
in
g
…
43
To access previous/older
readings:
•
You can access the previous/older
readings by pressing the “
”
button continuously.
•
When you reach the oldest
reading, you will hear a “beep”,
“
” appears and the Meter
gets back to the original display
(display when meter is turned on).
•
When you press the “
” button
again, the latest measurement
result comes up.
•
If you keep the “
” button
pressed, results move more
quickly.
Note well!
•
When more than 500 measurements have
been carried out, the oldest measurement
will be deleted to make room for the new
measurement.
•
If date and time are not set, all measurement
results are shown with “01 – 01 12:00” as
measurement time.
•
Even if you remove the batteries, the previous
results are kept in the Meter.
•
The measurement results of “
” (Higher
than 33.3 mmol/L) and “
” (Lower than
1.1 mmol/L) are recorded as such.
For details on “Hi” or “Lo”, go to page 39.
•
When the measurement was made at a
temperature out of the range of specification
(10 – 35° Celsius), measurement result is
displayed with . For more details about ,
please go to page 38.
