SMW14O/G/P/Y
EN
4
OPERATION
Preheating the toaster:
This operation must be performed before you begin the toasting
process.
Plug the appliance into a wall electrical socket.
•
Close the lid of the sandwich toaster. Switch the mains
•
power “ON’. The red power light will come on.
After a few minutes the correct operating temperature will be
reached and the green temperature light will come on.
The toaster is now ready for use.
CAUTION: Whenever the toaster is connected to a live mains
outlet it will be powered and the toasting surfaces will be hot.
Using the toaster:
During operation, the temperature light will go ‘ON’ and ‘OFF’.
This indicates that the unit is functioning correctly.
Cut slices of bread of sufficient size, so they do not overlap the
edges of the toasting plates.
For golden toasted sandwiches we recommend lightly buttering
the outside of the bread, i.e. the filling is placed between the
plain sides of the bread.
If you wish to butter the insides of the bread in the normal way,
you may find that after toasting a number of sandwiches, the
indents (scallops) in the toaster plates may need to be re-oiled
with margarine, butter or cooking oil.
Prepare one or two sandwiches, place them on the lower
toasting plate and gently but firmly close the lid and click the
catch into place.
If the filling is too thick, open the toaster and remove the excess.
DO NOT FORCE THE LID DOWN.
Allow the sandwich to toast for approximately two minutes.
When the sandwiches are toasted open the appliance handles
and remove the sandwiches.
Toasting time will be a matter of taste. Your sandwich toaster
will toast both sides of the sandwiches at once and will seal
in the flavour. With “hard” fillings, stringy bread, or very thick
sandwiches, you may have to cut them apart.
While the scallops are coated with a non stick coating, some
fillings may melt and cause the sandwiches to adhere to the
scallops. To free the sandwiches, use a heatproof plastic or
wooden spatula.
NEVER USE A SHARP OBJECT SUCH AS A KNIFE OR STEEL SPATULA.
THIS WILL DAMAGE THE NON-STICK COATING.
WARNING:- During use the toaster plates get very hot, and
should be treated with extreme caution.
During use the surface will get hot.
USE OVEN GLOVES IF YOU NEED TO MOVE THE APPLIANCE.
Getting the best from your toaster:
Always preheat your sandwich toaster.
Always butter the outsides of the bread slices.
We recommend the use of natural hard cheeses, such as
Cheddar. Avoid using processed cheeses as they tend to “run”
under high temperatures.
A small amount of sugar sprinkled on the buttered sides makes
the toasted sandwiches crispier.
After using the sandwich toaster:
Switch off the unit at the power outlet.
Remove the plug from the power outlet and allow the sandwich
toaster to cool down completely.
INSIDE: Wipe the scallops and cutters with a clean absorbent
cloth, or a length of kitchen roll.
OUTSIDE: Wipe with a soft cloth which has been rinsed almost
dry in warm soapy water, and dry with a soft cloth.
DO NOT use abrasive chemicals steel wool, scouring pads or
abrasive pads on either the inside or outside of the sandwich
toaster.
After all the components have been cleaned and dried, stow
the sandwich maker safely out of direct sunlight and out of the
reach of children.
Summary of Contents for SMW14G
Page 27: ......