T-100 Series UPS User Manual
7
III. INSTALLATION
3.1 Unpacking
The UPS is packed and enclosed in a structural cardboard carton to protect it from damage.
1.
Inspect for damage that may have occurred during the shipment If any damage is noted, call the
shipper immediately and retain the shipping carton and the UPS.
2.
Carefully open the carton and take the UPS out.
3.
Retain the carton and packing material for future use.
Unit package contents :
T-102, T-103
T-106, T-107, T-110
T-115
User Manual
Guarantee Certificate
Battery Cabinet
-
-
Additional battery cabinet
O
O
O
Input cable
-
-
UPS Monitoring Software
T-MON
T-MON
T-MON
* O : Optional
3.2 Location Selection
The UPS is designed to be installed in a protected environment. The following conditions should be
prohibited.
1.
Blocking the airflow intake and outlet. (It is recommended to retain 10 cm (4”) minimum. Between the
rear side and the wall.)
2.
Environment temperature and humidity out of specification.
3.
Location subject to excessive moisture, dust and corrosion.
4.
Location exposed to heat source or direct sunlight.
3.3 Cable Connections
CAUTION!
Only qualified personnel should install or service UPS / batteries.
The ac input to the UPS should be supplied by a separate line from the ac distribution board.
The input/output cables can be sized to suit the modules rating according to the table below.
2 kVA
3 x 1 mm
2
7,5 kVA
3 x 6 mm
2
3 kVA
3 x 2,5 mm
2
10 kVA
3 x 6 mm
2
5-6 kVA
3 x 4 mm
2
15 kVA
3 x 10 mm
2
Reverse line polarity indicator
Summary of Contents for T-100 Series
