background image

General Terms

Subject to the exclusions and limitations

described below, the Charging Equipment
Limited Warranty covers the refund, repair or
replacement necessary to remedy any
manufacturing defects in Tesla manufactured
and supplied Wall Connector, Mobile

Connector or charging adapter that occur
under normal use for a period of 12 months
from the date of invoice to the customer. Any
Tesla connector or adapter included in the
initial purchase and delivery of a Tesla vehicle
by Tesla is covered under the Basic Vehicle

Limited Warranty section of the New Vehicle
Limited Warranty for 4 years or 50,000 miles
(80,000 km), whichever comes first, subject
to the terms and conditions of the New

Vehicle Limited Warranty.

This Charging Equipment Limited Warranty
does not cover any damage or malfunction
directly or indirectly caused by, due to, or
resulting from, normal wear or deterioration,
abuse, misuse, negligence, accident, lack of or
improper use, maintenance, storage or
transport, including, but not limited to, any of
the following:

Failure to follow the instructions,
maintenance and warnings published in
the documentation supplied with your

Tesla connector or adapter;

External factors, including but not limited
to, objects striking the Tesla connector or

adapter, faulty or damaged electrical
wiring, junction boxes, circuit breakers,

receptacles or power outlets, the
environment or an act of God, including,
but not limited to, fire, earthquake, water,
lightning and other environmental
conditions;

General appearance or damage to paint,
including chips, scratches, dents and
cracks;

Failure to contact Tesla upon discovery of
a defect covered by this Charging

Equipment Limited Warranty;

Any repair, alteration or modification to
the Tesla connector or adapter or any

part, or the installation or use of any parts
or accessories, made by a person or
facility not authorized or certified to do
so;

Lack of or improper repair or

maintenance, including use of non-
genuine Tesla accessories or parts; and

Use for commercial purposes.

Although Tesla does not require you to
perform all maintenance, service or repairs at
a Tesla Service Center or Tesla authorized
repair facility, this Charging Equipment
Limited Warranty may be voided, or coverage

may be excluded, due to lack of or improper
maintenance, service or repairs. Tesla Service

Centers and Tesla authorized repair facilities
have special training, expertise, tools and
supplies with respect to Tesla connectors and
adapters and, in certain cases, may employ
the only persons, or be the only facilities

authorized or certified to work on Tesla

connectors and adapters. Tesla strongly
recommends that you have all maintenance,

service and repairs done at a Tesla Service
Center or Tesla authorized repair facility in
order to avoid voiding, or having coverage

excluded under, this Charging Equipment
Limited Warranty.

Charging Equipment Limited Warranty

Charging Equipment Limited Warranty

31

Summary of Contents for 1069742-00-A







































Reviews: