Tesla KT301BX, User Manual

3

KNOW ELECTRIC KETTLE 

BEFORE USING KETTLE

USING YOUR ELECTRIC KETTLE

If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling 
the Max capacity of water once and then discarding the water twice. Wipe the surface with a damp cloth.

NOTE

: The max capacity of kettle is 1.5L.

1. Place the kettle on the flat surface.
2. To fill the kettle, remove it from the power base and 

open the lid by pressing down lid release button, 
then fill the kettle with the desired amount of water 
and close the lid. The water level must be within the 
Min and the Max level. Too little water will cause the 
kettle switching off before the water has boiled. 

NOTE

: Do not fill the water over the maximum 

level, as water may spill out of the spout when 
boiling. Ensure that the lid is firmly in place before 
plugging the power outlet.

3. Position the kettle on the power base. 
4. Connect the plug into a power outlet. Press down 

the switch and the indicator will light up, and then 
the kettle starts to boil the water. The kettle will 
switch off automatically once the water has boiled. 
If necessary, it will take you 30 seconds to wait 
before pressing the switch again to re-boil the 

water. You may shut off the power by lifting switch 
up or directly lift the kettle from the power base at 
any moment to stop boiling process. 

NOTE

: Ensure that switch is free of obstructions 

and the lid is firmly closed, the kettle will not turn 
off if the switch if be constrained or if the lid is 
opening.

5. Lift the kettle from the power base and then pour 

the water. 

NOTE

: Operate carefully when pouring the water 

from your kettle as boiling water may result in scald, 
besides, don’t open the lid while the water in the 
kettle is hot.

6. The kettle will not re-boil until the switch is pressed 

again. The kettle may be stored on the power base 
when not in use. 

NOTE

: Always disconnect the power supply when 

not use.

Body

Handle

Power base

Spout

Lid

Lid button

On / off switch - 
Operational indicator