Steam discharge intensity:
Low - MIN button (for daily cleaning, wooden floor, etc.) or High - MAX
button (for durable floors, on greasy surfaces, tiles or stone). Hot steam can be used at the same time
as vacuuming the floor or separately only as a steam mop.
Ready to release steam:
the „STEAM READY“ indicator flashes during heating. A fully lit indicator
indicates that steam can be emitted by pressing the Steam release control button (1).
CAUTION:
Water that appears on the floor when using the hot steam cleaning function is part of the
normal operation of the appliance.
ATTENTION!
Do not touch the surface shown in the illustration,
to avoid scalding.
If the water level reaches below its minimum level or is completely without water, stop using the
steam function to prevent damage to the appliance.
CLEANING AND MAINTENANCE
Make sure that the appliance is unplugged and completely cooled down.
A: Press the switch to release the dust tank.
B, C, D: Remove the dust tank and empty it in the trash bin.
Summary of Contents for PowerStar GT400
Page 1: ...TESLA PowerStar GT400...
