Tesla RH2950M, User Manual

7

ENG

•  Dusts behind the freezer and on the ground shall be timely cleaned to improve the cooling  effect and 

energy saving. The interior of the freezer should be cleaned regularly to avoid odor. Soft towels or 
sponge dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer 
of shall be finally cleaned with clean water and dry cloth. Open the door for natural drying before the 
power is turned on.

•  Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic 

solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean freezer 
considering that this may damage the fridge surface and interior.

•  Do not rinse with water so as not to affect the electrical insulation properties. Please use a dry cloth 

when cleaning temperature control knob and electrical components.

•  Freezer shall be manually defrosted.
•  Unplug the freezer and open the freezer door, remove foods and shelving basket before defrosting; 

Open the outflow hole and drainage hole (and place water container at the outflow hole);

•  indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost softens, an ice 

scraper might be used to the accelerate de-icing process.

•  Please remove the food and put in a cool place when defrosting before removing accessories.

Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended 
to reduce the frequency of opening door and do not put fresh foods into the freezer. Please unplug the 
freezer left unused for a long time for cleaning. Keep the door open to avoid the bad odor.
Do not turn upside or vibrate the freezer, the carrying angle can not be greater than 45°. Do not hold the 
door and hinge when moving this unit.

MAINTENANCE OF FREEZER

Cleaning

Defrost

Stop using

Please unplug the freezer for defrost and cleaning.

Other mechanical devices or other means shall not be used to accelerate except those 
recommended by the manufacturer. Do not damage the refrigerant circuit.

Continuous operation is recommended when the freezer is started. Please do not stop the 
freezer under normal circumstances so as not to affect the freezer’s service life.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after-sale service department if the 
issues are not settled.

Device is not working

Chech whether the freezer is plugged in and has power.
Low voltage.
Whether temperature control knob is in the work area.
Failure power or tripping circuit.