10
ENG
10. The picture after completion is shown as below
(The picture above is only for reference. The actual
configuration will depend on the physical product or
statement by the distributor)
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.
• Before initial start, keep the refrigerator still for half an hour before
connecting it to power supply.
• Before putting any fresh or frozen foods, the refrigerator shall have run for
2-3 hours, or for above 4 hours in summer when the ambient temperature
is high
• Spare enough space for convenient opening of the doors and drawers or
statement by the distributor.
• The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This
cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.
Changing the Light
Energy saving tips
Starting
Summary of Contents for RI2700M
Page 80: ...tesla info ...
