14
ENG
Door seal fails to be
tight
Remove foreign matters on the door seal
Heat the door seal and then cool it for restoration
(or blow it with an electrical drier or use a hot towel for heating)
Water pan overflows
There is too much food in the chamber or food stored contains too much
water,resulting in heavy defrosting
The doors are not closed properly, resulting in frosting due to entry of air
and increased water due to defrosting
Hot housing
Heat dissipation of the built-in condenser via the housing, which is normal.
When housing becomes hot due to high ambient temperature and storage
of too much food, it is recommended to provide sound ventilation to
facilitate heat dissipation.
Surface condensation
Condensation on the exterior surface and door seals of the refrigerator is
normal when the ambient humidity is too high. Just wipe the condensate
with a clean towel.
Abnormal noise
Buzz: The compressor may produce buzzes during operation, and the
buzze: are loud particularly upon start or stop. This is normal.
Creak: Refrigerant flowing inside of the appliance may produce creak, which
is normal.
Summary of Contents for RI2700M
Page 80: ...tesla info ...
