CLEANING MODE - AUTOMATIC CLEANING
FIRST START
1.
This is the most common way of cleaning.
2.
Insert the batteries into the remote control, make sure the polarity is correct.
3.
Install the cleaning brushes, depending on the color.
4.
Connect the charging station to an electrical outlet with a 230 V power adapter.
There must be no obstacles within 2 meters in front
and 1 meter on the sides from the charging station. The
charging station must be placed on a flat surface, we
also recommend to fix the station to the wall or floor
with a double-sided adhesive tape. Place the power
cord so it does not get entangle in the cleaning brushes
of the vacuum cleaner.
A mirror or other objects with strong reflection can not
be placed in the area of the charging base 15 cm above
the ground. The base should not be exposed to direct
sunlight.
5.
Place the vacuum cleaner in the charging station.
6.
The vacuum cleaner battery will start charging automatically.
7.
Full battery charge will be signaled by the LCD icon on display.
8.
Before putting the vacuum cleaner into operation, prepare the room so there are no objects on
the floor that may prevent the vacuum cleaner to operate properly (bigger sheets of paper, cables,
stickers, small items, inappropriately placed carpet, etc.).
9.
Remove the chairs and other larger items so the vacuum cleaner can easily reach inaccessible
places.
10.
Switch the ON/OFF button ("
2
") on the control panel to the "
I
" position.”
11.
Press the "
1
" button on the vacuum cleaner or on the remote control button "
3
" to place the unit
in "Standby mode".
12.
To start up, press the "
1
" button on the top of the device or the "
3
" on the remote control.
Summary of Contents for RoboStar T80 Pro
Page 1: ...TESLA RoboStar T80 Pro ...
Page 51: ......
