3. Install the safety cable in a suitable place, you can use a suction cup to secure it and adjust its
length to secure the appliance against falling. Make sure that the length of the power cord or rope
does not restrict the movement of the appliance on the window.
START
1.
Connect the appliance to the mains. Do not disconnect it from the power supply while cleaning.
2.
Place the appliance on the glass in the middle of the window, at least 8 cm from the window
frame. Press the
control button on the appliance for a few seconds.
3.
The appliance is successfully attached to the window surface when the LED starts to glow
permanently blue. It is then safe to select the cleaning mode.
AUTOMATIC MODE
Press the
control button on the appliance or the
control button on the remote control.
OTHER MOVEMENT MODES
Cleaning mode in a
“Z”
shape is suitable for wide windows. In this mode, the automatic water
spray will work when the appliance is moving to the right. When used on a narrow window,
automatic spraying may not be functional.
Cleaning mode in an
“N”
shape is suitable for tall windows.
Cleaning mode in a “
ZN”
shape is a combined mode suitable for all windows. In this mode, the
automatic water spray will work when the appliance is moving to the right.
You can also control the appliance manually with the directional arrows “right, left, up, down”.
SPRAYING WATER ONTO THE SURFACE WHICH IS TO BE CLEANED
1.
After pressing the
button, water will automatically be sprayed at an interval of 10 seconds.
Water spray is functional in “Z” or “ZN” mode when the appliance is moving to the right.
2.
After pressing the
button, water will be sprayed once. Only use when the appliance is
moving to the right.
PAUSING CLEANING
Press the
button on the body of the appliance or use the
button on the remote control.
In the event of a power failure, the appliance operation indicator will flash blue/red and the appliance
will operate using the backup battery for approximately 10 minutes.
Summary of Contents for RoboStar W600
Page 1: ...TESLA RoboStar W600...
