21
start the heating stop function, and the device will no
longer be able to adjust the temperature.
• Press any button to cancel the heating stop functi-
on and return to automatic mode.
App operation:
• Click the Heating stop icon ( ) to turn on/off the
function in settings.
Note: Once the function is activated, other functions
are not available unless the function is deactivated
9.10 Anti-Calcification (Descaling) Protection
The equipment will automatically run for a period of
time every week to prevent calcification of the valve.
9.11 Boost
The boost function makes use of human sensations
of heat. When activated, the valve will be fully
opened for 5 minutes. The heating of a room takes
longer than 5 minutes, but the heat given off by the
radiator can be felt immediately.
• Press the boost button to activate the boost
function.
• The remaining time for the function will be counted
down in seconds(‘299’ to ‘000’).
• After these 5 minutes have elapsed, the actuator
changes to the mode which was previously active(au-
to/manual) with the previously set temperature.
• The function can be deactivated at any time by
pressing the boost button again.
