24
ENG
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have a detrimental or
adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority
can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of the
water used. This is intended to optimize and customize the level of salt consumption.
Please follow the steps below for adjustment in salt consumption.
1. Switch on the appliance;
2. Press the Start/Pause button for more than 5 seconds to start the water softener set model within 60seconds
after the appliance was switched on;
3. Press the Start/Pause button to select the proper set according to your local environment, the sets will change
in the following sequence: H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the set up model.
WATER HARDNESS
Water softener
level
Salt
consumption
(gram/cycle)
German
dH *
French
fH **
British
Clarke ***
Mmol/l
0 - 5
0 - 9
0 - 6
0 - 0.94
H1
0
6 - 11
10 - 20
7 - 14
1.0 - 2.0
H2
9
12 - 17
21 - 30
15 - 21
2.1 - 3.0
H3
12
18 - 22
31 - 40
22 - 28
3.1 - 4.0
H4
20
23 - 34
41 - 60
29 - 42
4.1 - 6.0
H5
30
35 - 55
61 - 98
43 - 69
6.1 - 9.8
H6
60
❼
Program
indicator
Glass
For lightly soiled crockery and glass.
90 Min
For normally soiled loads that need quick wash.
Rapid
A shorter wash for lightly soiled loads that do not need drying.
Soak
To rinse dishes that you plan to wash later that day.
❽
Screen
Selected program indicator.
❾
Warning
indicator
Rinse Aid
If the
indicator is lit, it means the dishwasher is low on dishwasher rinse aid and
requires a reill.
Salt
If the
indicator is lit, it means the dishwasher is low on dishwasher salt and
needs to be reilled.
❿
Screen
To start the selected washing program or pause it when the dishwasher is working.