Lobo SuperTraq Operator Instruction Manual
http://tesoro.com/LoboSuperTraq_Manual.htm
2 sur 18
21/06/2007 14:36
Please keep this in mind: If there is no gold where you are searching, it won’t matter how good your
metal detector is or how skilled and persistent you are. To learn more about where to search for gold, see
your dealer for magazines and books on the subject.
PRODUCT DESCRIPTION
The LOBO SuperTRAQ features Tesoro's latest electronic innovations including the SuperTRAQ
Computerized Ground Mineral Tracking System. State-of-the-art circuitry and advanced design make the
LOBO SuperTRAQ one of the finest gold nugget metal detectors available. Expanded Discrimination
circuitry lets the LOBO SuperTRAQ double as a high-performance coin and relic hunting detector as
well.
The LOBO SuperTRAQ is a Transmitter-Receiver (TR) type detector that operates in the Very Low
Frequency (VLF) portion of the Radio Frequency (RF) spectrum. The detector uses three control knobs
and two toggle switches to provide full VLF capabilities with fingertip adjustment of all controls.
The performance of this detector will satisfy the requirements of the serious gold nugget prospector and
detectorist, whether experienced or a beginner. At the heart of the LOBO SuperTRAQ is a totally new
circuit board developed from Surface Mount Technology. This circuit board helps provide ultra-smooth
operation in the most difficult soil conditions along with greater depth and sensitivity to smaller gold
nuggets.
The features found on the LOBO SuperTRAQ make its power both versatile and easy to use. The
SuperTRAQ System automatically performs troublesome “ground balancing.” There are two Operating
Modes: All Metal and Discriminate. Slight motion is required in either mode so the searchcoil will detect
a target located directly under it. The All Metal Mode tuning is Fast Auto Tune that readjusts the
threshold quickly after encountering a target. The Discriminate Mode is Silent Search. The fingertip
PINPOINT switch helps identify a target's exact location by momentarily switching to a No-Motion All
Metal Mode without Auto Tune. The LOBO SuperTRAQ also features the added power and depth of
Tesoro's MAXBoost Sensitivity.
The LOBO SuperTRAQ comes standard with a 10” elliptical widescan searchcoil for best all-around
performance with good rejection of ground mineralization—a most important feature for gold
prospecting. A variety of optional, interchangeable searchcoils are also available, further adding to the
versatility of this metal detector.
GETTING STARTED - UNPACKING THE BOX
Your Lobo SuperTRAQ was shipped with these parts:
1 Upper Pole Assembly
Fully assembled, including upper pole stem with handle grip, padded arm bracket and
control housing.
1 Middle Pole Assembly With Pole Lock
1 ABS Lower Pole Assembly
Fully assembled, complete with two friction washers, mounting screw, and thumb nut.
1 10" elliptical, widescan searchcoil with 8’ Cable
2 battery packs with 4 AA cell alkaline batteries each
1 Tesoro Warranty Card
