JUMBO
TIP
.03 (0.8 mm)
.48 (12.2 mm)
.06 (1.5 mm)
.48 (12.2 mm)
.02 (0.5 mm)
1.13 (28.8 mm)
.07 (2.0 mm)
.93 (23.6 mm)
.03 (0.8 mm)
.48 (12.2 mm)
.10 (2.5 mm)
.74 (18.8 mm)
.06 (1.5 mm)
1.21 (30.7 mm)
.04 (1.0 mm)
1.21 (30.7 mm)
.20 (4.9 mm)
.93 (23.6 mm)
.32 (8.3 mm)
.97 (21.1 mm)
CHANGING TIP
1.
MAKE SURE YOUR TOOL IS COOL!
2.
Turn Retaining Sleeve counter-clockwise to remove.
3.
Remove old Soldering Tip.
4.
Insert new Tip.
5.
Install Retaining Sleeve. (should be "finger" tight only.)
SOLDERING TIPS
Iron Plated for long life•Nickel and Chrome Plated for optimum heat transfer
CONTACT EDSYN FOR MORE SELECTIONS
A
B
Large and heavy tip for
heavy duty soldering.
Fine point tip for
SMD soldering.
LT374
Standard Probe
LT375
Standard Spade
LT392
Extra-Long Needle Point
LT394
Extra-Long Spade
LT446
SMD Probe
LT337BC
Heavy Duty Terminal Spade
LT223BC
Heavy Duty Fine Spade
LT222BC
Extra long Needle Point
LT153BH
Jumbo Spade
LT155BH
Jumbo Angle Spade
SET-UP & REQUIRED ACCESSORIES FOR HEAVY DUTY AND JUMBO TIPS
Apply
AN112 or AN122* Anti-Seize
Compound
to Heater and area of Tip
c o n t a c t .
"BC"
HEAVY DUTY TIP
AC735
TA350
RS351
RS271
*AN122 Anti-Seize Compound comes in syringe dispenser.
DO NOT USE the soldering tool if soldering tip is loose. This will cause the heater element to break.
Retaining Sleeve
RS372
- for General Purpose Tip
RS271
- for Heavy Duty Tip
Soldering Tip
