MEASUREMENT
29
Press enter to confirm.
2. Select memory
location
Use the Left and Right arrow keys to
select a digit. The selected digit will
flash.
Use the Up and Down arrow keys to
edit the value of the selected digit.
Range
00~19
Press ENTER to confirm the
setting.
After saving the settings, the meter will return to the
compare mode function.
Note
Pressing SHIFT before pressing ENTER will exit the Save
mode.
Recall Compare Settings
Background
The Recall function retrieves the Normal, High and Low
limit settings from one of 20 memory locations. If these
values are not saved, the settings will be lost after exiting
Compare mode.
Up to 20 Normal, High, Low settings can be saved on
the GOM-802.
1. Select Recall
mode
Press SHIFT +
RECALL
to access
the RECALL/SAVE mode.
Press the Up and Down arrow key
to show “CALL” in the main display,
as shown above.
Press ENTER to confirm.
