Notes
Testboy
®
TV 292
15
ENG
LI
SH
ENG
LI
SH
Notes
Safety notes
WARNING
Sources of danger are mechanical parts, for example, which can cause serious
personal injury.
Objects are also at risk (e.g. damage to the instrument).
WARNING
An electric shock can result in death or serious personal injury, and also functional
damage to objects (e.g. damage to the instrument).
WARNING
Never point the laser beam/ LED beam towards the eyes directly or indirectly,
via reflective surfaces. Laser radiation can cause irreparable damage to the eyes.
General safety notes
WARNING
Unauthorised modification and/or changes to the instrument are not permitted, for
reasons of safety and approval (CE). In order to ensure safe and reliable operation
using the instrument, you must always observe the safety instructions, warnings and
the information contained in the section "Intended use".
WARNING
Please observe the following information before using the instrument:
|
Do not operate the instrument anywhere near electrical welders, induction heaters
or other electromagnetic fields.
|
After abrupt temperature fluctuations, the instrument must be allowed to adjust to
the new ambient temperature for approx. 30 minutes before using it, in order to
stabilise the IR sensor.
|
Do not expose the instrument to high temperatures for a long period of time.
|
Avoid dusty and humid environments.
|
Measuring instruments and their accessories are not toys, and must be kept out of
the reach of children!
|
In industrial facilities, the accident prevention regulations for electrical systems and
equipment, established by the employer's liability insurance association, must be
observed.
Please observe the five safety rules:
1
Disconnect
2
Ensure that the instrument cannot be switched back on again
3
Ensure isolation from the power supply (both poles deenergized)
4
Earth and short-circuit
5
Cover adjacent live parts
