Chapter 4 – Using the F4T Front Panel
TestEquity 101H Temperature/Humidity Chamber
Page 37
Exporting/Importing Profiles and Configuration via USB
Transferring Profile Files
Profiles can be exported and imported as individual files via USB. This is useful for transferring
profiles between different chambers and for archival purposes. The profile files contain all the
profile steps that would ordinarily be entered via the front panel or Composer software. It does
not contain any logged data.
To export a profile file to a USB thumb drive:
1.
Insert a USB thumb drive into USB host port on the chamber.
2.
Press the
Menu
button.
3.
Press the
File Transfer
button.
4.
Press
Export
, then press
Profile
.
5.
A screen will pop up the names of each stored profile. Press the desired profile name to
export it. A progress bar will appear and then indicate 100% when done.
To import a profile file to a USB thumb drive:
1.
Insert a USB thumb drive into USB host port on the chamber.
2.
Press the
Menu
button.
3.
Press the
File Transfer
button.
4.
Press
Import
, then press
Profile
.
5.
A screen will pop up the names of each stored profile. Press the desired profile name to
import it. A progress bar will appear and then indicate 100% when done.
Transferring Configuration Files
The F4T configuration file contains a “System Image” of all settings that determine how the
controller inputs and outputs work and how the display appears. The configuration file also
contains all profiles. It does not contain any logged data. The configuration can be exported for
archiving purposes. It can also be imported to restore the configuration from a previous archive.
!
CAUTION:
Configuration files are unique to each model chamber and must NEVER be
transferred to a different model chamber.
To export a Configuration file to a USB thumb drive:
1.
Insert a USB thumb drive into USB host port on the chamber.
2.
Press the
Menu
button.
3.
Press the
File Transfer
button.
4.
Make sure the Import/Export button is selected for
Export
.
5.
Press the
Export
button next to
Configuration
.
6.
A progress bar will appear and then indicate 100% when done.
Importing a configuration file is accomplished like the profile import except you select
Configuration and then selecting the desired configuration file.
