Chapter 5 – Composer Software
Page 56
TestEquity 101H Temperature/Humidity Chamber
Deleting Steps
To delete a step:
•
Right-click the step and choose
Delete Step
in the pop-up menu.
Or
•
Click the step and then click the
Delete
button at the bottom of the step list.
Or
•
Click the step and press the
Delete
key on the computer keyboard.
Password Protect a Profile
To avoid inadvertent changes to a profile, apply password protection to it.
To set a password for a profile:
1.
Click the
Password
button.
2.
In the dialog box enter a password (10 characters maximum).
3.
Re-enter the same password to verify it.
4.
Click
OK
.
Note:
A password protected profile requires the password be entered to edit but not to copy it or
to delete it. If the profile is duplicated, the duplicate is not password protected.
Changing or Removing a Password from a Protected Profile
To change or remove a profile’s password, the password must be known.
To change a profile’s password:
1.
Select the profile by clicking it in the profile list.
2.
Enter the password and click
OK
.
3.
Click the
Password
button.
4.
Enter a new password (10 characters maximum).
5.
Re-enter the same password to verify it.
6.
Click
OK
.
To remove a profile’s password:
1.
Select the profile by clicking it in the profile list.
2.
Enter the password and click
OK
.
3.
Click the
Password
button.
4.
Click the
Remove
button.
