4 Transmitter
31
Pos: 48 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Kanäle bearbeiten @ 3\mod_1234511119158_79.doc @ 25322 @ 34 @ 1
4.4.5.
The individual main menus
4.4.5.1.
Editing main menu of channel 1
An overview is given in Overview of the testo 6781 user menu,
page 29).
You can perform basic settings for channel 1.
1.
In the Measuring Mode press
SET
, select
Main Menu
Channel 1
with
or
and confirm selection with
SET
.
One of the following parameters can now be selected using
or
, after which the selection must be confirmed with
SET
:
•
Channel 1 Unit
The parameter for this channel is selected.
Edit/select parameter with
or
, confirm with
SET
or abort
entry with
ESC
.
•
Scale minimum for channel 1:
The lower scale limit is edited; Unit as selected above.
Editing the value: Scroll one digit to the right using
and
increase value of digit by 1 using
. Confirm with
SET
or abort
entry with
ESC
.
•
Scale maximum for channel 1
The upper scale limit is edited;
Unit as selected above.
Editing the value: Scroll one digit to the right using
and
increase value of digit by 1 using
. Confirm with
SET
or abort
entry with
ESC
.
•
Signal delay ("Attenuation") for channel 1
The analog signal can be delayed ("Attenuation"); a time
constant is selected for this (1 = no delay; 2-15 = delay in
seconds)
Edit/select parameter with
or
, confirm with
SET
or abort
entry with
ESC
.
2.
Continue to the main menu with
or
or return to Measuring
Mode with
ESC
.
Pos: 49 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Alarm bearbeiten 6781 @ 4\mod_1244645622570_79.doc @ 44953 @ 455 @ 1
