4 Transmitter
33
9.
Return to
Alarm x
with
ESC
.
10.
Change to the other alarms using
or
and perform settings
in the same way.
Using alarm as collective alarm or not using it at all
If an alarm is assigned to the collective alarm, the display flashes
as soon as (at least) one of the warning or error messages of the
testo 6781 transmitter becomes active.
The messages affecting the collective alarm can only be
selected in the P2A software, see Using the software page
50
✓
Alarm is selected (see previous steps 1 and 2).
1.
Use
or
to determine whether
Alarm x
should be used as a
Collective alarm
or
not used
. Confirm selection with
SET
.
2.
If collective alarm is selected: Select
Visual alarm
with
or
.
Select
YES
or
NO
with
or
. Confirm with
SET
and return to
Alarm x
.
3.
Change to another alarm using
or
and perform settings in
the same way.
4.
Return to
Main Menu Alarm
with
ESC
.
5. Continue to
Main Menu Settings
with
or
or return to
Measuring Mode with
ESC
.
Pos: 50 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Einstellungen bearbeiten 6781 @ 4\mod_1244535897708_79.doc @ 44917 @ 455555 @ 1
4.4.5.3.
Editing Main Menu Settings
You can edit instrument settings and other settings.
> In measurement mode press
SET
, press
or
to select
Main
menu Settings
and confirm the selection with
SET
.
You can edit settings for:
•
Init. phase of transmitter
• Display
• Language
• Code
• Unit
◦
Absolute
pressure
◦
Temperature
• Hum.
process
data
