4 Transmitter
36
2.
Confirm
Confirm message
using
SET
.
3.
Select
Last messages
with
or
and confirm with
SET
.
4.
Scroll between the warning and error messages recorded so far
using
or
and return to
Last messages
using
ESC
.
5.
Select
Information
with
or
and confirm with
SET
.
6.
Scroll between the status messages recorded so far using
or
and return to
Information
using
ESC
.
7.
Continue to
Display of message
with
or
.
ON
: Measurements are shown on the display in Measuring
Mode.
OFF
: No messages shown on display.
8.
Select
ON
or
OFF
with
or
and confirm selection with
SET
.
9.
Return to
Main Menu Message
with
ESC
.
10.
Continue to
Main Menu Ident
with
or
or return to
Measuring Mode with
ESC
.
An overview of the messages can be found in Status,
warning and error messages page 39
Pos: 53 /TD/Produkt verwenden/MUF 63xx/Hauptmenü Ident abfragen 6781 @ 3\mod_1239269378840_79.doc @ 31053 @ 4 @ 1
4.4.5.6.
Calling up Main Menu Ident
1
Serial number
2
Instrument type
3
Build number
4.
Firmware
version
1.
In the Measuring Mode press
SET
, select
Main Menu Ident
with
or
and confirm selection with
SET
.
-
The type, firmware version, build number and serial number of
the transmitter are displayed.
This information is required when servicing.
2.
Return to
Main Menu Ident
with
ESC
.
