5
SAFETY INSTRUCTIONS
WARNING:
Read this manual and understand all instructions before operating the tool.
If you have any questions, please contact with our authorized representatives.
OX
CO
2
The operator and all persons in the general area should wear
safety glasses to guard against flying fasteners and debris,
which could cause severe eye injury. Safety glasses are per
requirements of the Regulatory Authority. Always wear hearing
protection and hard hat.
Never use oxygen, carbon dioxide or any other bottled gas as
a power source for this tool Danger of explosion and/or serious
personal injury may result.
Use only clean, dry regulated compressed air at recommended
pressure
Tools shall not be connected to a compressor which potentially
exceeds 175 psi or 12 bar.
Air hose rated for a maximum operating pressure of 150 psi
(10.3 bar) or 150% of the maximum system pressure, whichever,
is higher.
Disconnect tool from air supply and remove fasteners from
magazine before doing tool maintenance, clearing a jammed
fastener, leaving work area, moving tool to another location, or
handing the tool to another person.
120 Psi
8.3 bar
70 Psi
4.9 bar
Summary of Contents for BN3438JH
Page 12: ......
