TESTO Saveris 0572 2800, Instruction Manual

4 Product use 

11 

Status LED 

Cause 

After being switched on, the data 
logger flashes red at one-second 
intervals for a total of 10 seconds. 

An error occurred during the system test. 
Data logger must not be used! 

The LED lights up green while the 
button is pressed. 

The data logger limit values have thus far 
been adhered to. 

The LED lights up red while the 
button is pressed. 

The data logger limit values were 
violated. 

The data logger flashes red for 10 
seconds during/after the data 
transfer. 

Data transfer was not successful. The 
data logger will make another attempt to 
transfer its data when the button is 
pressed again. 

Green and red LEDs flash 
simultaneously at one-second 
intervals after removal and 
pressing the 

Start/Check

 button. 

The measurement data was transferred 
successfully. 

4.4

Displaying measurement data  

The data logger does not have an integrated temperature display. Once the 
measurement data is transferred, it can be viewed in the database. For more 
detailed information, please consult the documentation for the testo Saveris 
Food Logistics Inbound software. 

4.5

Alarms 

The LEDs on the data logger provide an indication as to whether the limit 
values were adhered to or violated. After a data logger is switched on, if the 

Start/Check

 button is pressed again, one of the two LEDs lights up while it is 

pressed.  



 LED lights up green: the measurement data is within the limit values. 



 LED lights up red: the limit values were violated. There is an alarm. 

Even after the data transfer, you can check whether alarms were 
triggered over the measuring period by pressing the 

Start/Check

button.