background image

6 Authorizations 

16 

FCC warning statement 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures: 

• Reorient or relocate the receiving antenna. 

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help. 

Caution 

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment. Shielded interface 
cable must be used in order to comply with the emission limits. 

Warning 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: 

(1) this device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that may 
cause undesired operation. 

Caution: Radio Frequency Radiation Exposure 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This 
equipment should be installed and operated keeping the radiator at least 20 cm or more 
away from person´s body in normal use position. 

Co-Location:  

This transmitter must not be co-located or operated in conjunction with any other 
antenna or transmitter. 

 

 

Summary of Contents for Saveris 0572 2800





















Reviews: