Installation of the range hood over an appliance
which runs on solid fuel (wood or coal) is allowed
only in case the appliance is permanently
enclosed. If the appliance has not been cleaned in
accordance with the cleaning instructions it is
possible to suck in sparkles or other small burning
particles and thus to cause fire.
Do not bend or crush the power cord during
installation! Otherwise the cord may get damaged.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Do not leave your home while the appliance is
operating. Please ensure it has been switched off.
The power supply cord of your appliance is equipped
with grounded plug. This cord shall be connected to
a grounded power socket.
Do not break or bend the cord, do not pull it along
sharp edges and do not place it on hot surfaces or
open flame!
Place the power cord in such a way that it does not
hamper the movement of people and it will not be
stepped on! Use only approved extension cords
which are suitable for the appliance, i.e. they should
bear conformity sign!
Never move the appliance by pulling its cord and
never use its cord for transporting objects!
Only qualified electrician shall make the electrical
connections.
When discharging the air out of the room use pipes
with diameter 120 mm or 150 mm. The pipe
connection should be as short as possible and to
have the minimum possible number of curves.
