9
signal and the LED will illuminate in
purple for 2 seconds. The music on
the first set of headphones will then
be shared with the second set.
Playback controls can be done on
either set of headphones.
6. To end music sharing, press the
power button
and the control knob at
the same time for 2 seconds on either
set of headphones.
Both sets of headphones will emit an
acoustic signal when music sharing is
ended.
Using the connector cable
Connecting the cable
1. The enclosed connector cable has
two 3.5 mm jack plugs. Insert the
notched 3.5 mm jack plug into the
3.5 mm jack
5
of the headphones.
Make sure the cable remote control is
closer to the headphones than to your
audio system or smartphone.
2. Turn the jack plug clockwise to
securely lock the jack plug to the
headphones.
3. Connect the other jack plug of the
connector cable to the 3.5 mm jack of
your audio system or smartphone.
4. To disconnect the connector cable
from the headphones, turn the jack
plug counterclockwise to unlock the
jack plug from the connection. Then
gently pull the jack plug away from the
3.5 mm jack.
Notice:
The Bluetooth function will
automatically end once the headphones
are connected via the 3.5 mm jack plug.
Using the remote control
The remote control on the connector
cable features a built-in microphone
and a control button for making
phone calls, using voice assistant and
controlling music playback.
The following functions are available:
Function
Operation
Accept incoming
call/end the call
Press the control
button
once
Rejecting incoming
call
Press the control
button
twice
Activate voice
assistant (e.g. Siri)
Press and hold
the control
button
Pause or resume
playback
Press the control
button
once
Skip to the next track Press the control
button
twice
Skip to the previous
track
Press the control
button
three
times
