10
·
Columa 700 R
Button designations and their functions
Standby
Switches the subwoofer on (press once) or off
(press again), after the power supply has been
switched on at the rear of the device (»Power« –
see page 11). A blue LED indicates that the device
is on standby.
Input
Use this button to select the input signal. The
inputs are selected in sequence each time you
press the button.
This increases the overall volume of the system.
Volume –
This decreases the overall volume of the system.
During operation the display always shows the
selected signal source, e.g. »coax« and the repro-
duction mode e.g. »AC3« = Dolby Digital. This dis-
play is interrupted when you make any changes,
such as to the volume. As soon as this activity is
ended, the display indicates the originally select-
ed signal source again.
Function: Subwoofer front/display