9
·
Concept R 2
Audio connections
You can connect the Concept R 2 to any modern
Dolby Digital/DTS 5.1/6.1/7.1 AV receiver for a 5.1
set-up with an active subwoofer. If your AV re-
ceiver is 6.1/7.1, simply ignore the Rear Centre
Out(s).
If your receiver is 5.1, connect the front, centre and
rear speakers as shown in the diagram.ĕ
Fig . 1
Connect the subwoofer output (Sub Out) of your
Dolby Digital/DTS AV receiver to the right Line
Input (R) of the subwoofer using a mono RCA
cable.ĕ
Fig . 2
In this set-up, the left input (Line Input L) is not
connected. If you want to feed the Sub Out signal
to both of the subwoofer's inputs, use a Y adapter
(see Accessories, p. 6).
Connecting the speakers
to an AV surround
receiver – example:
5.1 set-up
1 . Front, centre and rear speakers
AV receiver
Speaker output
Teufel
connection
panel
2 . Subwoofer
RCA line output
AV receiver
Sub out
RCA line input
Input R
Subwoofer
Input L
R
Speaker cable
Mono RCA cable
Sub out
+ -
Centre
AV receiver
Front right
Front left
Rear left
- +
Rear right
- +
-
+
-
+
Concept R 2
floorstanding speaker
Concept R 2
floorstanding speaker
Concept R 2
centre speaker
Concept R 2
floorstanding
speaker
Concept R 2
floorstanding
speaker
Subwoofer RCA line input
Concept R 2
active
subwoofer