15
• Holist S
NOTICE
If the device is
subjected to warm
temperatures after
being cold (e. g. after
transport), condensa-
tion may occur inside
of it.
–
In this case, wait
approx. 2 hours
before you connect
and activate it.
The isolation pads
can produce discol-
ouration on sensitive
surfaces.
–
On varnished wood,
parquet and similar
surfaces, you should
stick felt gliders to
the rubber feet of
the device or put
a blanket under it.
This will prevent
discolouration of the
floor over the long
term.
Location tips
• Select a stable, level
base.
• Make sure that the envi-
ronment is clean and
free from dust.
• Select a location away
from heat sources and
direct sunlight.
• Do not place any objects
on the cables or the
device.
Location