11
• Transmitter Subconnect TX
Troubleshooting
The following advice should help you to solve problems. If this does not help,
you will find useful information in the detailed FAQs on our website. Otherwise,
please contact our hotline (see page 3). Take note of the warranty instructions.
Problem
Possible cause
Solution
No function.
The Subconnect TX
has “hung up”.
Pull the mains adapter out of the
socket and insert it back in the
socket after approximately 10
seconds.
The Subconnect TX
does not automati-
cally switch on/off.
The slider switch
(4)
has not been set
correctly.
Change the switch setting accord-
ing to the table on page 9.
No connection is
established.
The receiver has not
been switched on.
Switch on the receiver.
Distance is too great
or objects are block-
ing the connection
signal.
Adjust the location of the devices.
The connection is not
automatically estab-
lished.
Push the pairing button
(5)
.
The subwoofer is too
loud/quiet.
The volume has been
set incorrectly.
Adjust the volume by turning the
potentiometer
(3)
.
