Teufel T 1106/1 SW, Technical Description And User Manual

8

 • T 1106 / 1 SW

Operation

Activating and deactivating

–

Insert the mains plug in an easily accessible 
socket. 
The subwoofer will switch on when it is connected 
to the mains supply. 
The LED 

“POWER STATUS” (2)

 lights up. 

–

If the subwoofer does not receive any signal 
for a certain time, it will automatically switch to 
standby. As soon as a signal is present again, it 
will switch back on.

Connecting the subwoofer

1. The subwoofer will search for a previously 

connected device immediately after activation. 
During this phase, the LED 

“PAIRING STATUS” (3)

will blink slowly.

2. Also switch the device you intend to connect to 

pairing mode (see the user manual for the device). 
The device and subwoofer should have paired 
with one another after a short time. The LED 

“PAIRING STATUS” (3)

 will then be illuminated 

permanently. If the devices do not connect with 
each other, please proceed as follows:

3. Hold down the button 

“PAIRING” (1)

 until the LED 

“PAIRING STATUS” (3)

 blinks quickly. Also switch 

the device you intend to connect back to pairing 
mode.