5
7
Connecting
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
• Disconnect the power plug of your AV receiver or preamplifier
(DecoderStation/ControlStation) from the socket.
• Ideally, the subwoofer is connected to the subwoofer output
of your AV receiver or preamplifier (DecoderStation/Control-
Station) using a mono RCA connector cable.
• The RCA jack
7
“Line In” on the back side of the subwoofer is
intended for this purpose.
• See the operating instructions of your receiver or the
Decoder Station/ControlStation for more information.
• If your receiver doesn’t feature a subwoofer connection,
connect an available speaker output to the RCA jack
7
of
your subwoofer using a voltage reducer and a RCA connector
cable. We offer voltage reducers on our website in the “Ac-
cessories” area.
Connecting to a power supply
• Ensure that the mains switch
10
“Power” on the subwoofer is
switched off (“0 OFF” position).
• Connect the mains connector jack
8
with a mains socket
using the power cord.
• In addition, reconnect the power plug of your AV receiver or
DecoderStation/ControlStation to the socket.
8
10
