5
4
Connecting
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a
trip hazard.
• Disconnect the power plug of your amplifier/AV receiver
or preamplifier (DecoderStation/ControlStation) from the
socket.
• Ideally, the subwoofer is connected to the subwoofer output
of the amplifier/AV receiver or preamplifier (DecoderStation/
ControlStation) using a mono RCA cable.
• The RCA jack
4
“Line In” on the back side of the subwoofer is
intended for this purpose.
• For additional information please review the operating
instructions of your amplifier/AV receiver or DecoderStation/
ControlStation.
• If you amplifier/AV receiver doesn’t feature a subwoofer
connection, connect an unoccupied speaker output to the
RCA jack
4
of the subwoofer using a voltage reducer and a
RCA cable. We offer voltage reducers on our website in the
“Accessories” area.
Connecting to a power supply
• Ensure that the mains switch
9
“Power” on the subwoofer is
switched off (“0 OFF” position).
• Connect the mains connector jack
10
with a mains socket
using the power cord.
• In addition, reconnect the power plug of your AV receiver or
DecoderStation/ControlStation to the socket.
9
10
