Helpline No UK Mainland 0161 975 0458 Ireland 1800 882912
Web Support www.fascin8.co.uk
Model Number: 40093
11
AM/FM
Press to switch between the AM mode and the FM mode.
RDS
Press this button repeatedly to change the display information.
Note: If the tuned station is not transmitting an RDS signal or not an RDS
station, NO RDS will be
displayed.
MO/ST
Press to switch between Mono and Stereo reception of the broadcast signal in FM mode.
Memory
After tuning in a new frequency, press [MEMORY] then select a preferred station by inputting the
corresponding numbers to save it as a preset station.
The system can store up to 80 preset channels,
40 in FM mode and 40 AM
mode.
Auto
Press to begin an auto scan for the broadcasting radio channels from 87.50Mhz to 108Mhz in
FM mode and from 522Khz to 1620 Khz in AM mode.
Number pad
The digit keys can be used to select a preset channel.
For example, press [0] and [2] for the preset channel 2 press [1] and [5] for the preset channel 15.
/-
Press to fine tune (increase/decrease) the frequency manually.
Radio +/-
Press to skip to the next/previous preset station.
Remote Control
ABOUT RDS
RDS function is only available in areas that use RDS system. RDS (Radio Data System) Is a broadcasting
service that allows FM stations to send additional information along with the regular Fm radio signal. The
additional information can contain the following item: Station Name, Radio Text and Frequency.
When an RDS radio station is received, the RDS station name will appear on the display. While receiving
an RDS radio station, you can change the display information by pressing [RDS] on the remote control
repeatedly.
NOTE:
In tuner mode, [/-], [CH-LEVEL], [MUTE], [TONE] and [S.EFFECT] buttons are available. For
details, please refer to the remote control function of the DVD part.
