Helpline No UK Mainland 0161 975 0458 Ireland 1800 882912
Web Support www.fascin8.co.uk
Model Number: 40093
17
System Setup
Closed Captions
When set to ON. When a disc encoded with closed captions is playing, the closed captions will be
shown on the screen. Set the item to OFF to hide them.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions.
NOTE: This function only works with those discs encoded with closed captions.
Screen Saver
When set to ON: If the image remains motionless on the screen, for example the disc is paused, stopped
etc, for several minutes, a screen saver will appear on the screen. You can press any key or button except
[STANDBY] to wake it up.
The unit will go into the standby mode after about 20 minutes being in the screen saver mode. You can
press [STANDBY] to switch it on.
When set to OFF: Disable the screen saver function.
HDCD (High Definition Compatible Digital)
HDCD (High Definition Compatible digital) is a patented encode/decode process for delivering the full
richness and details of the sound from HDCD-encoded CDs.
You can set the digital filter to 2x, 1x or off.
Last Memory
When set to ON: During playback or in the paused status each time you open the disc tray or turn off
the player, the unit will memorize the last playback time. Next time when you insert the same disc and
close the disc tray to load the disc, the unit will play from the memorized point.
NOTE: If you change the disc it will then loose the memory from the previous disc.
When set to OFF: Disable the last memory function.
AUDIO SETUP PAGE
Analogue audio setup
Downmix
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and is output via the FL and FR
speakers respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR speakers.
3D SURROUND: This mode creates a virtual surround effect from stereo or multi- channel audio
contents.
5.1CH: Turn off the DOWNMIX mode. If this unit is connected to a 5.1-channel amplifier, this item should
be selected.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
